Agsar Terrace Coat is superior quality heat reflective water based coating, reduces the temperature of the roof so called open Terrace. This leads to reduction of temperature (approximately 7 to 9 Deg C) inside the room for us to live. The elastomeric nature of the coating bridges minor cracks and it has good water proofing property also. It is easy to apply either with brush or with roller and no need to remove existing brickbat coba, if it is in sound condition.
| 1. | Viscosity of supply | 120-125 Krebs unit at 30° C |
| 2. | Packs available | 20 and 1 lit |
| 3. | Shade available | White |
| 4. | Surface to be painted | Asbestos sheet, Terracotta Tiles, Paver Blocks / Brick bat Coba |
| 5. | Method of application | Brushing or Rolling |
| 6. | Primer to be used | No primer coating is needed. Agsar Terrace coat can be applied directly on the Terrace floor. |
| 7. | Thinner to be used | General purpose thinner |
| 8 | Drying time | Surface drying within 4 - 6 hours |
| 9. | Average coverage capacity per coat |
130-140 square feet per litre per coat. |
| 10. |
Finish |
Glossy and smooth |
|
11. |
General Directions for use |
The open terrace, normally built with brickbat coba, should to be washed thoroughly and dried well. It must be free from dirt, fungus, algae and loose matter. Surface Imperfections such as holes, dents and fine cracks are to be filled with Agsar Number 1 wall putty or a mixture of grey cement and fine sand only (in the ratio of 1:3). Apply as such without dilution either by roller or by brush. If required 100ml maximum water can be added for 1 Liter of Terrace coat. Second coat can be given after 4 – 6 hours of painting first coat. Three coats are recommended for achieving better performance. |