Agsar Anti-corrosive Black Primer is an ideal coating particularly for surfaces exposed to humid and saline conditions. It gives excellent protection against corrosion at an economical price. Apart from the first quality Anti-corrosive Black Primer specially made for under chassis of vehicle are also available. Agsar Anticorrosive Black Primer is recommended for protecting iron and steel structures where black color is not objectionable. It is waterproof and to some extent acid and alkali proof also.
| 1. | Viscosity of supply | 10 sec by Ford cup No.B6 at 30° C |
| 2. | Packs available | 20,4,1 lit and 500ml |
| 3 | Surface to be painted | Iron, Wood, concrete, cement plaster etc. |
| 4 | Primers to be used | Red oxide metal primer. However, two coats of Agsar Anti-corrosive BlackPrimer without any metal primer undercoat will also give satisfactory results. |
| 5. | Method of application | Brush, roller and spray |
| 6. | Viscosity of application | 10 Secs by Ford Cup No.B6 or less according to requirement |
| 7 | Thinner to be used | General purpose thinner |
| 8. | Drying time | Surface drying within 1 hour, hard drying within 12 hours. The above varies with atmospheric temperature and humidity. |
| 9. | Average coverage capacity | 85 -125 square feet per litre per coat. |
| 10. | Finish | Smooth and glossy |
| 11. | General Directions for use | The surface to be painted should be dry and free from rust, grease, oil and loose particles. The Black Anti-corrosive Primer must be stirred will before use. Protect the newly brushed surface from dust before drying. The first coat should be allowed to dry hard before applying the second coat. |