Agsar Black Board paint is specially designed for painting of wooden and asbestos boards. It has good resistance towards slippage of chalk during writing.
| 1. | Viscosity of supply | 80 to 90 sec by Ford cup No.B4 at 30° C |
| 2. | Packs available | 20,4,1 lit and 500ml |
| 3 | Shades available | Black and Green |
| 4 | Surface to be painted | Wood, Asbestos and Masonry |
| 5. | Primers to be used |
Agsar Wood Primer for wood Agsar Cement Primer Oil Base for Asbestos and Masonry |
| 6. | Method of application | Brushing or spraying |
| 7. | Thinner to be used | General purpose thinner |
| 8 | Drying time | Surface drying within 30 minutes, Hard drying within 18 hours depending upon the atmospheric conditions of temperature and humidity. |
| 9. | Average coverage capacity per coat | 150-170 square feet per litre per coat. This varies with the surface coated |
| 10. | Finish | Smooth and matt |
| 11. | General Directions for use | The surface to be painted should be dry and free from rust, grease, oil and loose matter. Apply a suitable primer. Stir the paint thoroughly before and during application. Allow the paint to dry hard before applying the second coat. |