Agsar Micro Matt is a fine-textured coatings suitable for exterior applications. In Indian climatic conditions, it has proved to be a most reliable protective and decorative finish for exteriors. This withstands hot sun and rain.
| 1. | Viscosity of supply | 100 to 110 Krebs unit |
| 2. | Shades available | As per shade card |
| 3. | Packs available | 20Lit, 10Lit, 4Lit,1Lit and 500ml |
| 4. | Surface to be painted | Cement sand, cement lime sand, rough cast, pebble dash craft, asbestos cement sand, concrete bricks and bituminous surfaces. |
| 5. | Primer to be used | Apply a single coat of Agsar Cement Primer-Water Base as a primer coat. On metallic surfaces such as ferrous, brass, copper a protective coating of Agsar Metal Primer has to be applied before applying Micro Matt. |
| 6. | Method of application | This can be applied by using roller or brush. Apply the paint coat in one direction only. No need to add water while thinning for application. However upto 100ml of clean water to 1 litre of Agsar Micro Matt may be added when the backing is absorbent or during hot weather. |
| 7. | Drying time | Surface drying within 30 minutes, hard drying within 6-8 hours. The above varies with atmospheric temperature and humidity. |
| 8. | Average coverage capacity per coat | 70-75 sq.feet per litre. This covering capacity depends upon the smoothness of the surface to be coated. |
| 9. | Finish | Matt finish |
| 10. | General Directions for use | The surface to be painted must be free from loose materials and algal growth. Stir the Micro Matt thoroughly before and during application. Allow the paint to dry hard before applying a second coat. |