Agsar Macma Majik Super Ceiling White special provides a rich, smooth and bright finish typically suited for ceilings. It is formulated for better durability, brightness, whiteness and stain resistance. It has excellent hiding power and provides best in class brightness. Primer coating is not required, which is an added advantage. It can also be applied on walls.
| 1. | Viscosity of supply | 95 to 110 Krebs unit |
| 2. | Shades available | As per shade card |
| 3. | Packs available | 20Lit, 10Lit, 4Lit and 1Lit |
| 4. | Surface to be painted | Interior walls plaster, brickwork, asbestos cement sheets, concrete etc. |
| 5. | Primer to be used | Agsar cement primer (water base) / Oil base |
| 6. | Drying time | Surface drying within 30 minutes, hard drying within 4-6 hours. The above varies with atmospheric temperature and humidity. |
| 7. | Average coverage capacity per coat | 170 to 180 square feet per litre per coat. This varies with the conditions of the surfaces to be coated. |
| 8. | Finish | Perfect smooth finish |
| 9. | General Directions for use | Remove all dirt, loose paint, flakes and dust particles using a wire brush. Cover fine cracks, holes, dents with putty, and large cracks may need cement work. Allow sufficient time for the putty/ cement work to dry completely. It doesn’t need the previous application of primer painting. Dilute 1liter of Agsar Macma Majik Super ceiling white special paint with 400 – 500 ml of potable water. Apply with brush / roller. Allow the paint film to dry for 6 – 8 hrs and then apply the second coat paint. Two coats of Agsar Macma Majik Super Ceiling White special are sufficient for an excellent finish. |