Agsar Premium Gold Paint (Hi Gloss) is a quick drying solvent based acrylic paint which can be applied to metal, concrete, gypsum, wood to provide a rich gold effect finish. It is formulated for application by brush, providing a uniform distribution of metallic gold pigment across the substrate, giving a smooth finish. For decorating walls, plasters, wood and metal surfaces. It is recommended to paint on smaller areas to achieve best results.
| 1. | Viscosity of supply | 150-170 seconds by Ford Cup No.B4 |
| 2. | Packs available | 50ml, 100ml, 200ml, 500ml and 1 Litre |
| 3 | Surface to be painted | Metals, concrete, Wood and gypsum. |
| 4. | Method of application | Brushing |
| 5. | Primers to be used |
Ferrous surface: Agsar Red Oxide Metal Primer / Agsar Zinc Chrome yellow Metal Primer Wood : Agsar Wood Primer Plaster :Agsar Cement Primer (Oil Base) |
| 6. | Viscosity of Application |
At supply viscosity |
| 7. | Thinner to be used |
No dilution is necessary for best performance. If necessary, dilute with not more than 5% solvent. Air spray: Dilute with 10 – 15% solvent. |
| 8 | Coverage capacity | 73-78 Sq.Feet /litre per coat depending upon the surface. |
| 9. | Drying Time | Touch Dry:10 – 20 mins at 30 ºC ,Hard Dry: 20 - 25 mins at 30 ºC,OVERCOATING TIME: 35 - 45 mins minimum at 30 ºC |
| 10. | Finish | Hi Gloss premium (Pearl effect), smooth, metallic effect finish |
| 11. | Dry film thickness (1 coat) | 12 – 15 microns |
| 12. | General Directions for use |
The surface to be painted should be dry and free from rust, Grease, Oil and loose matter. On new surfaces, first give a primer coating as recommended. If the surface is already painted with paint it should be rubbed with fine sand paper and thoroughly cleaned before applying Agsar premium gold (Hi gloss) paint. Stir well and mix the entire quantity of supplied Agsar premium gold (Hi gloss) paint for uniform flow. Check the flow after viscosity obtained during mixing is suitable for both brushing and spraying. A second coat if required should be applied after drying for 35 to 45 mins. CLEANING:All equipment should be cleaned with water immediately after use. |