Agsar Macma Majik Emulsion is an economical emulsion paint supplied in attractive plastic containers and is highly recommended for interior use only. Painting is made affordable with Agsar Macma Majik emulsion. Agsar Macma majik emulsion can very well replace traditional distemper and found to be superior in all aspects.
Viscosity of supply
125 to 130 krebs unit
As per shade card
20Lit, 10Lit, 4Lit and 1Lit
Surface to be painted
Interior walls plaster, brickwork, asbestos cement sheets, concrete etc.
Primer to be used
Agsar cement primer (water base) / Oil base
Surface drying within 30 minutes, hard drying within 4-6 hours. The above varies with atmospheric temperature and humidity.
Average coverage capacity per coat
130 to 140 square feet per litre per coat. This varies with the conditions of the surfaces to be coated.
Perfect smooth finish
General Directions for use
Sand the surface with emery paper 180 to remove loose particles, paint, dust/grease. Wipe clean. Apply Agsar Cement primer water base /oil base as primer coat. Allow to dry overnight. Then apply Agsar Number 1 wall putty to smoothen the wall surface.Allow drying for 6-8 hours and now the surface is ready for painting Agsar Macma Majik Emulsion.Add 400-500ml of water to 1 Litre of Agsar Macma Majik Emulsion.Two to three coats are recommended for better and brighter finish. The second coat must be applied after 4-6 hours of painting the first coat.