Agsarcemis a cement Paint Manufactured from selected raw materials and high quality White Cement. They are ideally suitable for both interior and exterior application. Agsarcem is recommended for use on surfaces of cement, concrete, asbestos cement sheets, bricks, fiber boards etc. They give a hard, durable, weatherproof and waterproof surface. They give protection and decoration at a low cost. They are eminently suitable for tropical climates.
No primer is needed. An undercoat of white cement will give excellent result
Surface drying within 30 minutes, hard drying within 12-16 hours
85 to 90 square feet per Kg for single coat and cement plaster
40 to 55 square feet per Kg for double coats on cement plaster
This may vary depending upon the surface coated and shade used.
Directions for use
Mixing: Add one volume of water to 2 volume of AGSARCEM. Mix until a creamy consistency is obtained. Now add one more volume of water slowly with constant stirring till the paint is ready for use. Since the pot life of this mixture is two hours, use this mixture within one to two hours.
Application: Make sure that the surface to be painted is free from grease, oil dirt and loose particles. After cleaning the surface should be thoroughly wetted with clean water. When the water on the surface just begins to evaporate, apply the first cost. The paint mixture should be periodically stirred during painting. After 12 to 16 hours, repeat the entire procedure for a second coat. After drying the painted surface should be sprinkled with clean water for proper curing. For best results curing should be continued for 2 to 3 days.