Agsar Black Board paint is specially designed for painting of wooden and asbestos boards. It has good resistance towards slippage of chalk during writing.
Viscosity of supply
80 to 90 sec by Ford cup No.B4 at 30° C
20,4,1 lit and 500ml
Black and Green
Surface to be painted
Wood, Asbestos and Masonry
Primers to be used
Agsar Wood Primer for wood
Agsar Cement Primer Oil Base for Asbestos and Masonry
Method of application
Brushing or spraying
Thinner to be used
General purpose thinner
Surface drying within 30 minutes, Hard drying within 18 hours depending upon the atmospheric conditions of temperature and humidity.
Average coverage capacity per coat
150-170 square feet per litre per coat. This varies with the surface coated
Smooth and matt
General Directions for use
The surface to be painted should be dry and free from rust, grease, oil and loose matter. Apply a suitable primer. Stir the paint thoroughly before and during application. Allow the paint to dry hard before applying the second coat.