Agsar Aluminium Paint can with stand atmospheric corrosion. Excellent longevity and good heat resisting property coupled with higher covering capacity are the salient features. It is a two-pack system where the paste and medium are packed separately in the same container. Agsar Aluminium Paint is suitable for application oil tanks, gasholders, girders, trusses, corrugated roofs, pipelines etc. It has goods hardness, flexibility and water resistance.
| 1. | Viscosity of supply | 18-20 seconds by Ford Cup No.B4 |
| 2. | Packs available | 20,4,1 Lit and 500, 200ml |
| 3 | Surface to be painted | Metals, Wood, Plaster and other surfaces. |
| 4. | Method of application | Brushing or spraying |
| 5. | Primers to be used |
Ferrous surface: Agsar Red Oxide Metal Primer Aluminium or Galvanised steel: Agsar Zinc Chrome Red Oxide Metal Primer Wood : Agsar Wood Primer Plaster :Agsar Cement Primer (Oil Base) |
| 6. | Viscosity of Application |
At supply viscosity |
| 7. | Thinner to be used | General purpose thinner |
| 8 | Coverage capacity | 200-250 sq.feet /litre per coat depending upon the surface. |
| 9. | Drying Time | Surface drying within one hour, hard drying within 18 hours. The above varies with atmospheric temperature and humidity |
| 10. | Finish | Lustrous |
| 11. | Dry film thickness (1 coat) | 12 – 15 microns |
| 12. | General Directions for use | The surface to be painted should be dry and free from rust, Grease, Oil and loose matter. On new surfaces, first give a primer coating as recommended. If the surface is already painted with Aluminium paint it should be rubbed with fine sand paper and thoroughly cleaned before Agsar Aluminium paint is applied. Mix the entire quantity of supplied Aluminium paste with a small quantity of medium and then add the mixer to the remaining medium. The viscosity obtained during mixing is suitable for both brushing and spraying. A second coat should be applied after drying for 10 to 12 hours. |