Agsar Aluminium Paint can with stand atmospheric corrosion. Excellent longevity and good heat resisting property coupled with higher covering capacity are the salient features. It is a two-pack system where the paste and medium are packed separately in the same container. Agsar Aluminium Paint is suitable for application oil tanks, gasholders, girders, trusses, corrugated roofs, pipelines etc. It has goods hardness, flexibility and water resistance.
Viscosity of supply
18-20 seconds by Ford Cup No.B4
20,4,1 Lit and 500, 200ml
Surface to be painted
Metals, Wood, Plaster and other surfaces.
Method of application
Brushing or spraying
Primers to be used
Ferrous surface: Agsar Red Oxide Metal Primer Aluminium or Galvanised steel: Agsar Zinc Chrome Red
Oxide Metal Primer Wood : Agsar Wood Primer Plaster :Agsar Cement Primer (Oil Base)
Viscosity of Application
At supply viscosity
Thinner to be used
General purpose thinner
200-250 sq.feet /litre per coat depending upon the surface.
Surface drying within one hour, hard drying within 18 hours. The above varies with atmospheric temperature and humidity
Dry film thickness (1 coat)
12 – 15 microns
General Directions for use
The surface to be painted should be dry and free from rust, Grease, Oil and loose matter. On new surfaces, first give a primer coating as recommended. If the surface is already painted with Aluminium paint it should be rubbed with fine sand paper and thoroughly cleaned before Agsar Aluminium paint is applied. Mix the entire quantity of supplied Aluminium paste with a small quantity of medium and then add the mixer to the remaining medium. The viscosity obtained during mixing is suitable for both brushing and spraying. A second coat should be applied after drying for 10 to 12 hours.