Agsar Floor coat is a specially formulated paint manufactured from carefully selected and tested raw materials meant for coating cement floors and walls. It gives good gloss and pleasing appearance. It blends decorative and protective qualities that every user needs. Agsar Floor coat can withstand extreme conditions of wear and tear, moisture etc., generally occurring in floor coating.
Viscosity of supply
65-75 sec by Ford cup No.B4 at 30° C
20,4,1 lit and 500ml, 200ml
Red, Blue, Black, Green, Yellow, grey and Coffee Brown
Surface to be painted
Cement Floor and cement plastered walls
Method of application
Brushing or spraying
Primer to be used
No primer coating is needed. Agsar Floor coat can be applied directly on the floor.
Thinner to be used
General purpose thinner
Surface drying within 2 hours, Hard drying within 16 hours
Average coverage capacity per coat
85-130 square feet per litre per coat.
Glossy and smooth
General Directions for use
In the case of freshly prepared cement flooring, for excellent results the floor must be washed with very dilute hydrochloric acid (1:100) to neutralize the alkalinity, then thoroughly rinsed with water and allowed to dry. Without any primer coating, Agsar floor coat can be applied.
In the case of old floors, the floor to be painted should be dry and free from grease, oil, dirt and loose particles. Do not apply too thick a coat. Allow the paint to dry hard before applying the second coat.