Agsar Robo Emulsion is a high sheen luxury emulsion paint used for interior walls. It gives an outstanding silky smooth finish to the interior walls.
Salient features:
1. | Viscosity of supply | 116 to 135 krebs unit |
2. | Shades available | As per shade card |
3. | Packs available | 20Lit, 10Lit, 4Lit and 1Lit |
4. | Surface to be painted | Interior walls plaster, brickwork, asbestos cement sheets, concrete etc. |
5. | Primer to be used | Agsar cement primer (water base) / Oil base |
6. | Drying time | Surface drying within 30 minutes, hard drying within 4-6 hours. The above varies with atmospheric temperature and humidity. |
7. | Average coverage capacity per coat | 150 to 180 square feet per litre per coat. This varies with the conditions of the surfaces to be coated. |
8. | Finish | Perfect smooth finish |
9. | General Directions for use | The surface to be painted should be dry and free from dirt, grease, oil and loose matter. Apply Agsar Cement Water Base/ Oil base as primer. If necessary smoothen the wall with Agsar Number 1 wall putty. Add 400- 500ml of water to 1 litre of Robo emulsion for painting by brush/spray/roller. Second coat can be given after 4-6 hours of painting first coat. Two to three coats are recommended for better and brighter finish. For deep shades, apply an additional coat of paint. |
WARRANTY CERTIFICATE